USE OF HIGH DENSITY LIGHTS ON VEHICLES

USE OF HIGH DENSITY LIGHTS ON VEHICLES: 10.

Mr Siew Kum Hong asked the Minister for Transport what is the rationale for permitting high density lights to be installed on vehicles, especially sports utility vehicles, considering that use of fog lights is illegal except in low-visibility conditions.

The Minister of State for Transport (Mrs Lim Hwee Hua) (for the Minister for Transport): Mr Speaker, Sir, Mr Siew

Column: 394

Kum Hong is concerned about the safety implications of the high intensity discharge or HID headlamps installed on vehicles, especially sports utility vehicles (SUVs). The use of HID headlamps is a technological trend in the automotive industry. HID headlamps are more efficient in terms of energy consumption and can improve visibility for drivers, as compared with halogen lamps. As HID headlamps have met the relevant safety standards, LTA has allowed them to be fitted on vehicles registered here.

To reduce the glare caused by HID headlamps, some vehicle manufacturers have incorporated an automatic altering or levelling feature, which automatically adjusts the headlamp angle and direction according to the road and driving conditions so as to minimise glare. This feature is currently not mandated. However, as SUVs are usually constructed with higher ground clearance and, hence, have a higher headlamp position, the LTA is currently looking into requiring SUVs fitted with HID headlamps to incorporate features such as the automatic levelling feature as a condition for such vehicles to be registered for use.

Mr Siew Kum Hong: Sir, I would like to ask for clarification on what are the safety considerations that have been cleared for these HID lamps.

Mrs Lim Hwee Hua: Sir, the LTA requires all designs of vehicle lights to comply with the Road Traffic (Motor Vehicles Lighting) Rules, and they must bear approved markings to show that they comply with internationally recognised standards, such as those adopted in the European Union countries, Japan and the United States. The lights must also conform to the stipulated illuminated colour and intensity. For example, headlamps must show a white light, brake lights must show a red light. For headlamps, the LTA requires every unit fitted on a vehicle to be capable of

Column: 395

casting a white light to the front of the vehicle. The intensity and alignment of the headlamp must also be within the specified limits.